Kenwood HM-332 - Manual (Page 24)

Basic section
24
1 1
2 2 4 4
3 3
3 3
5 5
Recording on tape
Pause the recording
Stop the recording
Stop the recording
1. Load a tape in deck.
1 Press the TAPE 0 key.
2 Insert a tape.
3 Press the TAPE 0 key.
÷ Differentiation between normal (TYPE ) and high (TYPE ) tape is set
automatically.
÷ Remove tape slack before loading.
2. Select the tape transport direction.
÷ When recording is started, the tape is transported in the direction selected in this
step.
Check the tape transport direction indicator. *
÷ Wind the tape to the position where recording is to be started.
1 Press the TAPE23 key corresonding to the desired direction.
2 Stop playback.
To reverse the transport direction
TAPE
2 3
TAPE
0
1 1
2 2