Kenwood HM-332 - Manual (Page 42)

Application section
42
SLEEP
S
01 0:12
LEEP 10
Note Note Note
TIMER TIMER
SLEEP
5
6
TIMER
POWER
standby
/ timer
POWER
Timer operation
Put the unit in standby mode.
Reserve the timer operation.
÷ Press the TIMER key on the remote repeatedly until
"PROG.
1", "PROG. 2" or "PROG.1 2" lights.
When timer operation is not required
When power is ON, press the TIMER key to turn off
the timer-related indicators completely.
÷ The reservation contents are held in memory.
To set the same timer program again
When power is ON, press the TIMER key to turn on
the indication of the timer operation you want to
execute.
÷ Be sure to load a disc or tape and adjust the listening
volume.
To check or modify the reservation contents, restart the timer reservation from the beginning.
Sleep timer (SLEEP)
Set the number of minutes after which the unit is to be turned OFF.
Set the time.
Turn the unit OFF or press the SLEEP key until
the sleep time is cancelled.
To cancel
÷ The unit is turned OFF automatically after the set time
has elapsed.
÷ Each press increases the timer period by 10 minutes. The
sleep timer can be set up to 90 minutes.
10 =20=30...70=80=90=Cancel=10=20...
Duration for sleep timer
Lights
÷ The standby/timer indicator lights in amber in the standby
mode.
÷ After the timer has been set and power is off (timer
standby), if there is a power failure or the power cord is
unplugged from and plugged again into the power outlet,
the standby/timer indicator blinks in amber. In this case,
set the clock again.
PROG. 1 PROG. 2 PROG. 1 2
Each press switches the timer
as follows.
1 O.T.T.
2 PROG.
1
3 PROG.
2
4 PROG.
1 2
5 Extinguished
Each press switches the timer
as follows.
1 O.T.T.
2 PROG.
1
3 PROG.
2
4 PROG.
1 2
5 Extinguished