Kenwood HM-332 - Manual (Page 18)

Basic section
18
1 1
2 2
TAPE
0
1 1
Playback of tape
If you load a tape in the cassette deck in advance while
the power is off. pressing the TAPE
23 key turns power
on automatically and starts the tape playback.
To stop playback
Selection of TAPE EQ.
Selection of reverse mode To wind tape at high speed
Start playback
To wind tape at high
speed
To stop playback
1. Load a cassette tape.
1 Press the TAPE0 key.
2 Insert a tape.
3 Press the TAPE0 key.
Start playback
2. Start playback.
Press the TAPE
23 key of the desired direction.
Indicates the tape transport direction during playback or recording by
lighting of
2 or 3. This direction is the direction stored in memory when
the tape was last stopped.
Transport direction indicators
TAPE
2 3
2 2