Kenwood HM-332 - Manual (Page 14)

Basic section
14
3 3
2 2
1 1
POWER
1 1
down
volume/
multi control
up
3 3
Basic use method
Muting the sound temporarily
Bass and treble compensation
Bass and treble compensation
Listening through headphones
1. Set the POWER ( )key to ON.
When the POWER ( ) key is pressed while the unit is ON
switches it OFF. The standby/timer indicator lights red or amber.
÷ Pressing the CD 6, AUX, TAPE23 or TUNER/band key also turns power
on and starts playback (reception) of the corresponding input. (One-touch
operation)
÷ When the CD or TAPE input is selected while the corresponding disc or tape
has been loaded, it immediately starts to play.
2. Selecting the desired output.
÷ Pressing the CD 6, AUX, TAPE23 or TUNER/band key selects the
corresponding input.
3. Volume adjustment.
÷ The display shows a reference value.
The volume
decreases The volume
increases
Example:
To select the CD input
CD
6
2 2
CD ^
TAPE *
TUNER (Broadcasts) )
AUX (External input) ‡
"Adjusting the AUX input level" ‡
The system is switched ON and
STANDBY.