Kenwood HM-332 - Manual (Page 36)

Application section
36
Each press switches the operation.
1 “BASS” (low frequency) adjustment
2 “TREBLE” (high frequency) adjustment
3 Normal mode
1
2
TONE
BA SS 2 +
T
002 0 27
REBLE 4 -
menu
down
volume/
multi control
up
down
volume/
multi control
up
L
BALANCE
--•-+----R
set/demo
set/demo
VOLUME
Tone adjustment
Tone adjustment
The lowest and highest frequency bands can be adjusted independently. (Remote control only)
(To adjust the other frequency
band, repeat steps
1 and 2
for it.)
(Go to step 2 within 20 seconds.)
1 Select the frequency band.
Balance adjustment
(Adjust for the desired left / right balance.)
Adjusts the balance of left and right volume. (Main unit operation only)
Select “BALANCE ?”.
( Press the set/demo key while the “?” mark is
blinking.)
÷ The levels of both “BASS” and “TREBLE” can be
adjusted in 2 steps in the range between -8 and +8.
÷ Adjusting the tone while the “LOUD” or “EX.BASS”
indicator is lit turns it off and cancels the sound enhance-
ment mode.
2 Adjust.
Turning the knob switches the display contents.
TAPE RVS. ?
AUTO PRESET (or A.MEMORY ?)
(Only when the TUNER input is selected)
AUX INPUT
?
(Only when the AUX input is selected)
BALANCE ?
BACK LIGHT ?
A.P.S. SET ?
TIMER SET ?
Adjust.
The right
volume is
decreased. The left
volume is
decreased.
2 Set it.
1 Adjust the balance.