Kenwood HM-332 - Manual (Page 34)

34
Application section
3
1
2
STOP
TAPE O.T.E.
Convenient Recording Methods
One-touch edit recording
(CD
=
TAPE)
Records all tracks in a CD with a simple operation. (All-track recording)
Records a single CD track being played from the beginning. (Single-track recording)
Be sure to put the cassette deck in stop mode
Make the preparations for recording.
1 Perform steps 1 to 3 of the procedure in
”Recording on tape”. ¢
2 Insert disc in the CD player.
Check the current play mode of the CD player.
Start recording.
All-track recording Single-track recording
If it is in play mode, stop it. Select the desired CD track and play it.
To record other tracks, repeat steps
2 and
3 for each track.
To interrupt a recording
(Recording and playback will be
stopped.)
At the end of the recording
Cassette deck : Stop is executed after an unre-
corded portion of about 4 sec. has
been produced.
÷ When the TAPE O.T.E. key is pressed for ”Single-track
recording”, the CD track being played is replayed from
the beginning and recording start at the same time.
÷ Operation is also possible with the o.t.e. key of the main
unit.
Note that this cassette deck cannot record onto
Metal tapes.
Note Note Note
STOP