On time 7:00 m a, Off time 8:00 m a, Set the on time then the off time – Kenwood HM-332 User Manual
Page 41: Make the desired reservation
41
Application section
3
d
volume/
multi control
up
PROG.
1
ON TIME
7:00 m
a
PROG.
1
OFF TIME
8:00 m
a
set/demo
Timer operation
1 Adjust the time.
Set the ON time then the OFF time.
The time is
advanced.
The time is
returned.
÷ For each of the ON time and OFF time, enter the figure
of “hour” by performing steps
1 and 2 then enter the
figure of “minute” in the same manner.
÷ If you make a mistake, press the menu key and restart
from step
2.
1 TUNER ...... Broadcasts
2 CD
3 TAPE
4 AUX ........... External input (video, etc.)
2 Select the input source.
(1) Select what is to be
recorded.
(2) Enter it.
4
Make the desired reservation.
For timer playback or AI timer playback
1 Select the mode.
(1) Select “PLAY” or “AI
PLAY”.
(2) Enter it.
2 Select the input source.
(1) Select the source to be
played.
(2) Enter it.
÷ When the timer setting is completed by pressing the
set/demo key, “COMPLETE” is displayed.
÷ The source is played back at the volume set the last
time the power was turned off.
3 Select the broadcast sta-
tion (only when TUNER
is selected above).
(1) Select the preset sta-
tion No.
(2) Enter it.
1
PLAY
.......... Timer play
2 REC
3
AI PLAY
..... Timer play with gradually
increasing volume
For timer recording
1 Select the mode.
(1) Select “REC”.
(2) Enter it.
1 PLAY
2
REC
3 AI PLAY
1 TUNER
..... Broadcasts
2 AUX
.... External input
3 Select the broadcast sta-
tion (only when TUNER
is selected above).
(1) Select the preset station
No.
(2) Enter it.
÷ When the timer setting is completed by pressing the
set/demo key, “COMPLETE” is displayed.
÷ The sound is muted during timer recording. If you want
to monitor the recorded sound, turn the volume/multi
control knob (or press the volume key on the remote) to
adjust the volume.
d
volume/
multi control
up
set/demo
d
volume/
multi control
up
set/demo
d
volume/
multi control
up
set/demo
d
volume/
multi control
up
set/demo
d
volume/
multi control
up
set/demo
d
volume/
multi control
up
set/demo
2 Set it.
÷ To select AUX, rotate the volume/multi control knob
counterclockwise.
Continued to next page