Kodak ESP 5 - Manual (Page 42)

Maintaining Your Printer
36 Kodak ESP 5 Printer User Guide
Replacing Ink Cartridges
Your Kodak printer uses separate black and color ink cartridges. The ink levels are shown
on the control panel and in the printer software.
1 Make sure the printer is turned on.
2 Open the printer access door by lifting from the front center of the unit. The printhead
moves to an accessible position for handling the ink cartridges. The ink cartridges are
seated in the printhead.
3 Wait until the printhead stops moving, then
pinch the latch on the old ink cartridge with
your thumb and forefinger and lift it out of the
printhead.
4 Open the box containing the new ink cartridge.
Caution: For the best quality prints, store ink cartridges in locations
where the temperature does not exceed 85°F (30°C).
Warning: Use genuine Kodak ink cartridges to ensure best results
and avoid printhead damage not covered under warranty. Third-party
ink cartridges may not contain the necessary information to notify
you before the ink cartridge is empty, which could cause damage to
the printhead.
Note: You can take your used ink
cartridges to most office supply or
electronics stores for safe
disposal.
1 Printhead
2 Color Ink
cartridge
3 Black ink
cartridge