beautypg.com

Configuring photo print settings – Kodak ESP 5 User Manual

Page 24

background image

Viewing and Printing Photos

18

Kodak ESP 5 Printer User Guide

Most memory cards (see “” on page 3 ) will work with this printer. When you insert a
memory card into the card slot of the printer, connect a camera, or portable flash drive to it,
the last photo taken is displayed first.

Configuring Photo Print Settings

You can change the factory default print settings for your printer using the control panel.
Windows users may adjust some settings using the All-in-One Home Center software (see
Home Center Help for information on using Home Center).

1

Insert a memory card into the appropriate slot, or plug a portable storage device or an

image transfer digital camera to the front panel USB port. The last photo is displayed
first.

2

Press

Menu

on the control panel to display the main menu.

3

Press

until

View and Print Photos

is selected, and then press

OK

.

4

To view one photo at a time, press

or

on the control panel; to scroll up or down,

press and hold the

or

arrow.

5

Press

until the parameter you want to configure is selected, and then press

OK

.

6

As needed, press

or

to change the setting.

7

Press

OK

to save the setting for the current print job.

8

To save the setting as the default value, select

Save as Default

and press

OK

.

Image-storing Digital Camera

USB port

Kodak Bluetooth dongle

USB port

Note:

If Tagged Image Printing is enabled on this printer (see

“Configuring Printer Settings” on page 11), it detects a Digital Print
Order Format (DPOF) file when you insert a memory card. The printer
screen prompts you to verify that you want to print tagged images. See
“Printing Tagged Images” on page 20.

Caution:

Do not insert more than one memory device, such as a

portable storage drive (USB) or memory card, into the printer at a
time. An error message will display when a second device is
connected to your printer unless you are already printing a job. The
error message will only display after the print job is complete.

Note:

Photos stored on a PictBridge camera are displayed on the

camera screen.

Device Type

Printer Slot