Kodak ESP 5 - Manual (Page 41)

Chapter 7
Kodak ESP 5 Printer User Guide 35
1 Make sure that there are 5 - 10 sheets of plain paper loaded in the paper tray.
2 Press Menu to display the main menu.
3 Press until Maintenance is selected.
4 As needed, press until the desired option is selected.
5 Press OK .
6 Follow the prompts in the display screen to initiate or cancel the task.
These available maintenance options are shown in the table below:
Maintenance Options
Tip: A printhead alignment and a check of the inkjet nozzle can also be
initiated from the Home Center software.
Windows : Open the Home Center Help panel byclicking Help on the
Home Center window, as needed. Click Maintenance , and then click
Nozzle Check or Printhead Alignment .
Macintosh : Open the Home Center window and click Maintenance , and
then click Nozzle Correction or Printhead Alignment .
Menu Options Select
Check Ink Levels OK
Nozzle Check
OK
Printhead Alignment
OK
Clean Printhead
OK
Print Demo Sheet
OK
Print Test Page
OK
Format Memory Card
OK
Warning: Formatting will erase all the data on a memory card.