Kodak ESP 5 - Manual (Page 17)

Kodak ESP 5 AiO Printer User Guide 11
Use this chapter to set up and start using your Kodak All-in-One printer.
Selecting a Printer Location
Place your printer on a clean, flat surface in a dry, well-ventilated location, away from
direct sunlight. Avoid areas with high levels of dust and debris: Don’t expose the printer
and paper to ventilation ducts, open doors, or high traffic, as airborne particles can affect
picture quality.
Allow enough space on all sides of the printer to comfortably connect and disconnect
cables, change ink cartridges, and remove and load paper.
Configuring Printer Settings
Printer settings can be adjusted in two ways, via the control panel or the Home Center
software that comes with your printer (see Home Center Help for more details).
Configuring Basic Settings
1 Press Menu on the control panel to display the main menu.
2 Press until Printer Settings is selected, and then press OK .
3 Press until the parameter you want to configure is selected, and then press OK .
4 As needed, press or to set the desired sub-setting, as in configuring the current
date and time.
5 As needed, Press or to change the setting.
6 Press OK to save the setting(s).
2 Setting Up Your Printer