Kodak A-61003 - Manual (Page 38)

A-61003 September 1993 OM-11
Code Operator Message Displayed Description/Action Required
E292 Lamp failure Replace the exposure lamps.
Recalibrate the machine.
E293 Host recovery required Contact your System Administrator to
initiate the required action on the
host system.
E294 Front calibration warning Perform maintenance/cleaning
procedures for the Document Scanning
Array, Image Guides, etc.
Check the lamps; replace if necessary.
Recalibrate the machine.
E295 Rear calibration warning Perform maintenance/cleaning
procedures for the Document Scanning
Array, Image Guides, etc.
Check the lamps; replace if necessary.
Recalibrate the machine.
E296 Target not seen Repeat the calibration process using
a blank target.
If error repeats, call service.
E297 Document que full The feeder and transport are stopped,
and the machine is disabled.
Transfer images from the image buffer to
the host system.
Re-enable the machine.
Press the Run key to continue.
E298 Calibration required Enter function code F37 to initiate the
calibration sequence.
E500 System error Contact your System Administrator.
E501 A controlled power-down sequence
E502 is required.
E503
E512
E513
E550
E551
E552
E553
E562
E563