Kodak A-61003 - Manual (Page 24)

A-61003 September 1993 FC-12
Function Code Name/
Code Description Additional Input
F59 Endorser Print Position • Press the up arrow key to increment the
Allows you to specify how far starting print position by one (1) inch [25 mm];
from the leading edge of the or press the down arrow key to decrement the
document the endorsement starting print position by one (1) inch [25 mm];
will appear. or press the right arrow key to increment the
starting print position by one-eighth (0.125)
inch [3 mm]; or press the left arrow key to
decrement the starting print position by
one-eighth (0.125) inch [3 mm];
• Press the Enter key.
F60 Bar Code Reading 1 On/Off • Enter the number zero (0) to turn the bar code
Allows you to turn bar code reading OFF; or
reading on or off. enter the number one (1) to turn the bar code
reading ON.
• Press the Enter key.
F62 Bar Code / Patch Reading • Enter the number zero (0) to turn the bar code/
Confirmation Tone patch reading confirmation tone OFF; or
Allows you to turn the bar enter the number one (1) to turn the bar code/
code/patch reading patch reading confirmation tone ON.
confirmation tone on or off. • Press the Enter key.
F63 Bar Code Reading • Enter the number zero (0) to turn the bar code
Confirmation Tone reading confirmation tone OFF; or
Allows you to turn the bar enter the number one (1) to turn the bar code
code reading confirmation reading confirmation tone ON.
tone on or off. • Press the Enter key.
F64 Omit Bar Code Reading on • Enter the number one (1) to omit bar code
Next Document Only reading on the next document only; or
Allows you to omit bar code enter the number zero (0) to read bar codes
reading on the next document on the next document.
only. • Press the Enter key.
F65 Bar Code Test • Enter the number of the bar code test you want
Allows you to perform a test to perform: 1=Evaluate; 2=Display;
to verify the operation of 3=%Kodak; or 4=%Norm.
the bar code reader. • Press the Enter key.