Kodak A-61003 - Manual (Page 12)

A-61003 September 1993 EB-10
CLEARING THE
DOCUMENT PATH There are six (6) areas in the transport system where
documents may become lodged:
A The feeder/horizontal transport area
B The imaging guide area
C The lower roller assembly area
D The vertical transport area
E The upper turn area
F The document exit area
• Check each transport area, in turn (Area A through
Area F), for documents lodged in the document path.
You only have to remove the jammed document(s).
The jog feature places the rest of the documents
in the exit hopper.
NOTE: Make certain that all operator accessible
areas (designated by green labels) are firmly
closed and all baffle plates are locked into
place.
• Press and hold down the JOG key to clear any
remaining documents.
• Collect the documents located in the transport
system. Put them back into their original order,
if necessary.
• Reset the Image Address, Level, etc., if necessary.
• Refeed the documents.
If an error code appears in the Status Display, check
each transport area again to make certain that all
documents have been cleared.