Kodak A-61003 - Manual (Page 35)

A-61003 September 1993 OM-8
Code Operator Message Displayed Description/Action Required
E251 Use other side of lower cassette Rotate the film cassette to film on the
proper side.
Reload the film cassette into the machine.
E252 Check film threading - both cass Check film threading in the cassettes.
Press the Clear key.
Press the Run key to continue.
E253 Check film threading - upper cass Check film threading in the cassette.
Press the Clear key.
Press the Run key to continue.
E254 Check film threading - lower cass Check film threading in the cassette.
Press the Clear key.
Press the Run key to continue.
E257 AEC error - press STOP, then RUN Exposure error.
Press the Stop key.
Press the Run key and refeed the
document(s).
E258 Replace battery - upper cassette Replace the upper cassette battery.
E259 Replace battery - lower cassette Replace the lower cassette battery.
E260 Check cassette insertion Verify that the cassette(s) are in the
proper position and are properly inserted.
Press the Run key to continue.
E261 Check upper exposure lamps Replace upper exposure lamps.
E262 Check lower exposure lamps Replace lower exposure lamps.
E263 Check film threading - upper cass Check film threading in the upper
cassette.
Press the Clear key.
Press the Run key to continue.
E264 Check film threading - lower cass Check film threading in the lower
cassette.
Press the Clear key.
Press the Run key to continue.
E265 Clear error, re-enter lead code Press the Clear key.
Enter function code F31 to generate
lead end code.