Kodak A-61003 - Manual (Page 22)

A-61003 September 1993 FC-10
Function Code Name/
Code Description Additional Input
F45 Print Test • Enter the number of the print test you want
Allows you to test the position to perform: 1=Print IA test; 2=Prime test;
and print quality of all 3=Shift test; or 4=standard test.
document printers installed. • Press the Enter key.
F46 Print Position • Press the up arrow key to increment the
Allows you to specify how far starting print position by one (1) inch [25 mm];
from the leading edge of the or press the down arrow key to decrement the
document all document starting print position by one (1) inch [25 mm];
printers will print. or press the right arrow key to increment the
starting print position by one-eighth (0.125)
inch [3 mm]; or press the left arrow key to
decrement the starting print position by
one-eighth (0.125) inch [3 mm];
• Press the Enter key.
F48 Purge Print Head none
Allows you to initiate an
immediate priming ink spurt.
F49 Purge Frequency • Enter the number of documents, up to 50,000.
Allows you to specify how • Press the Enter key.
often, in terms of the number
of documents fed into the
transport, a priming ink
spurt is initiated.
F50 Patch Reader 1 On/Off • Enter the number zero (0) to turn the primary
Allows you to turn the primary patch reader OFF; or
patch reader on or off. enter the number one (1) to turn the primary
patch reader ON.
• Press the Enter key.
F51 Patch Reader 2 On/Off • Enter the number zero (0) to turn the secondary
Allows you to turn the patch reader OFF; or
secondary patch reader enter the number one (1) to turn the secondary
on or off. patch reader ON.
• Press the Enter key.