Kodak A-61602 - Manual (Page 79)

76 A-61602 January 2008
Cleaning the rollers 1. Open the scanner cover.
2. With a roller cleaning pad, wipe the feed roller from side to side.
Rotate the feed rollers to clean the entire surface.
3. Wipe the NFR rollers from side to side. Rotate the NFR rollers to
clean the entire surface.
NOTE: For easier cleaning of the NFR rollers, you may want to
order Kodak ScanMate i1120 Scanner Cleaning Swabs.
For ordering information see the section entitled, “Supplies
and Consumables” later in this chapter.
IMPORTANT: The roller cleaning pad contains sodium lauryl ether
sulfate which can cause eye irritation. Refer to the MSDS
for more information.
4. Dry the rollers with a lint-free cloth.