Kodak A-61602 - Manual (Page 76)

A-61602 January 2008 73
Diagnostics - Debug tab The Debug tab allows you to store the communications between the
scanner and a scanning application to a file that can be reviewed later.
In addition, the resulting images (both before and after image
processing has been done) can be saved.
Logging — saves the communications between the scanner and a
scanning application to a file for later review. Click the drop-down box to
select from Off (the default), On or Custom. It is suggested that you do
not use the Custom setting unless directed to do so by Kodak support
personnel.
Flag — by default, this is 1. Leave the flag at 1 unless instructed to use
another value by Kodak support personnel.
Filter — captures only those items in the scanner to the application
communication stream desired and filters out anything else. Options
are x, y and z.
Images - Received From Scanner — normally, it is not necessary to
save the images received from the scanner before your selected image
processing options are applied. Use this checkbox when instructed by
Kodak support personnel.
• Save: click this checkbox to save raw images from the scanner
(before image processing is applied).
• File prefix: use a relevant file prefix to more easily find and sort the
saved images. Raw is the default.
• Held in memory: determines the number of images to save before
the images are overwritten. Normally, only one or two are needed.
Adjust as necessary.