Kodak A-61602 - Manual (Page 27)

24 A-61602 January 2008
Smart touch
functionality
Smart touch functionality allows you to quickly and easily perform
common scanning tasks. Nine different functions can be assigned and
performed. You can perform any of the functions by pressing the Start
button on the scanner or by selecting the function from the smart touch
function listing. Predefined tasks are assigned to the functions so you
can immediately use the functions after installation. However, you can
easily configure each function to handle the tasks that are most
important to you.
Smart touch functionality runs from the system tray, making it easily
accessible when you need it. After the software drivers and scanner are
properly installed, smart touch is started and a Scanner icon will be
displayed on the system tray.
NOTE: If the Scanner icon indicates that the scanner is not ready, make
sure the scanner is powered on and the USB cable is
connected.
• Click on the Scanner icon on the system tray to display the smart
touch function listing. This list displays the currently configured
functions.
Function listing — click on one of the functions to run the assigned
task.
Configure — select Configure to change the task assigned to a
function.
About — displays the version number and information about smart
touch.