Kodak A-61602 - Manual (Page 7)

4 A-61602 January 2008
2 Getting Started
What’s in the box
Before you begin open the box and check the contents:
• Kodak ScanMate i1120 Scanner
• Input tray
• Output tray
• Pre-separation pad
• USB 2.0 cable
• Power supply
• AC power cord bundles
• Welcome Folio which includes:
- Bundled installation and application CDs
- Registration sheets
- Printed User’s Guide, English
- Service Contact sheets
- Quick Installation Guide
- Quick Tips Guide
- Miscellaneous flyers
System requirements
Following is the recommended system configuration to run the Kodak
ScanMate i1120 Scanner.
• Intel Pentium IV, 2.8 GHz processor, 512 RAM
Minimum: Intel Pentium III, 1 GHz processor, 128 RAM
• USB port 2.0 (compatible with USB 1.1)
• Windows 2000 Professional, Windows Vista, Windows XP
(Professional/Home)
• 100 MB free hard disk space
• CD-ROM drive
NOTE: The ability to scan longer documents or very high resolutions is
somewhat dependent on the available host PC memory.
Differences in memory used between scanning applications
may account for some issues scanning a long document at very
high resolution. While the memory guidelines above are
conservative, your experience may vary depending on your host
PC configuration and scanning application.