Kodak A-61602 - Manual (Page 19)

16 A-61602 January 2008
During the final installation process, this screen may be displayed:
5. If the above screen is displayed, select Yes. The installation of the
Kodak device driver for the scanner is complete. To test the
scanner, refer to the section entitled, “Verifying your scanner
installation” in Chapter 3.
If the driver installation was unsuccessful, see the section entitled,
“Scanner not working” in Chapter 6, Troubleshooting.
Installing application
software The Kodak Scan Validation Tool is installed when the Kodak driver
software is installed. Refer the section entitled, “Verifying your scanner
installation” in Chapter 3 for use.
Other scanning applications are provided on the CDs packed with your
scanner. Review these CDs for the other applications that are included.
You may also use other capture applications not provided. See the User
Guides provided with these applications for instructions on how to
install and use the software.