Kodak A-61602 - Manual (Page 15)

12 A-61602 January 2008
Connecting the power
cord to the scanner When the drivers have been installed, connect the power supply and
power cord to the scanner. Make sure that the power outlet is located
within 1.52 metres (5 feet) of the scanner and is easily accessible.
1. Select the appropriate AC power cord for your region from the
supply of power cords packed with your scanner.
NOTE: The power cord for the United States/Canada and China
look very similar. The difference is the United States/
Canadian power cord has holes in the prongs, and the
Chinese power cord does not.
2. Attach the power cord for your power type to the power supply.
NOTE: Be sure that the power cord plugged all the way into the
power supply is securely attached to the power supply
3. Plug the output power cord from the power supply into the power
port on the scanner.
4. Plug the other end of the power cord into the wall outlet.
China power cord
United States
and Canada