Editing a phonebook entry, Deleting a phonebook entry – Kodak 2.2 User Manual
Page 91
www.kodak.com/go/aiosupport
84
KODAK HERO 2.2 All-in-One Printer
Editing a phonebook entry
1. Press .
2. Press
to select
Send Fax, then press OK.
3. Press
OK
to select
Fax Options.
4. Select
Edit Phonebook, then press OK.
5. Press
to select
Edit Entry, then press OK.
6. Press
to select the entry you want to edit, then press
OK.
7. Press
to select the field you want to edit, then press
OK.
8. Use the LCD keyboard and/or numeric keypad to make your change(s).
9. Press
to select
DONE, then press OK.
Deleting a phonebook entry
1. Press .
2. Press
to select
Send Fax, then press OK.
3. Press
OK
to select
Fax Options
.
4. Select
Edit Phonebook, then press OK.
5. Press
to select
Delete Entry, then press OK.
6. Press
to select the entry you want to delete, then press
OK.
NOTE: If you do not want to delete the entry, press
.
7. To delete the entry, press
OK.
The entry is deleted from the phonebook.
8. Repeat steps 4 – 5 to delete more entries; when you are finished, press
.
Using the numeric keypad on the control panel to enter text and/or numbers
The number keys on the numeric keypad represent a number and several characters.
For example, the number
2 key also represents the letters A, B, C and a, b, and c. You
must press the
2 key multiple times to enter a corresponding letter. For example, to
enter the letter “B” as the first letter of a name, press the
2 key two times; to enter
the lowercase “b” at the beginning of a name, press the
2 key five times. If the
lowercase “b” is not at the beginning of a name or word, press the
2 key two times.
If you need to use the same key for more than one letter in a row (for example, to
type “Cab”), you need to pause between letters. To type “Cab”, press the
2 key three
times to enter “C”, then pause 3 to 4 seconds; press the
2 key once to enter “a”, then
pause 3 to 4 seconds; and press the
2 key two times to enter “b”. You do not need to
pause if the next letter is on a different key.
Note that the Symbols (*) key and the Space (#) key also cycle through several
different symbols when you press the key multiple times.
To make a correction to your entry, press
BKSP
(navigation button) on the control
panel to erase the rightmost character.