Kodak 2.2 User Manual
Page 109
www.kodak.com/go/aiosupport
102
KODAK HERO 2.2 All-in-One Printer
Updating if your printer is connected to a computer with MAC OS
To update the software:
1. Make sure that your computer is connected to the Internet.
2. Open Home Center Software.
3. Select the
Tools tab.
4. Click
Check for Software Updates.
5. If there are software updates, follow the on-screen instructions.
To update the firmware:
1. Make sure that your computer is connected to the Internet.
2. Connect the printer to the computer with a USB cable, Ethernet cable, or
wirelessly (if not currently connected).
3. Open Home Center Software.
4. Select the
Tools tab.
5. Click
Check for Printer (Firmware) Updates.
6. If there are updates, follow the on-screen instructions.
IMPORTANT:
Do not turn off or unplug your printer or your computer during the update.
Doing so may cause the printer to become inoperable. Your printer will
restart during the update.