Kodak 2.2 - Manual (Page 71)

www.kodak.com/go/aiosupport 64
KODAK HERO 2.2 All-in-One Printer
Two-sided copying
Manual two-sided copying
If the original is not on letter or A4-sized plain paper, or if you want the copy to be on
paper other than letter or A4-sized plain paper, you can make two-sided copies
manually.
1. Load the paper into the paper tray.
2. Place your original on the scanner glass (see Using the scanner glass, page 40 ).
3. Press .
4. Press to select Copy Document , then press OK .
5. If necessary, press to make changes to the copy settings.
6. Press to begin copying.
7. Remove the printed page from the output tray and rotate it 180 degrees, then
place the page into the paper tray (printed side down).
8. Place the next original on the scanner glass.
9. If necessary, press to make changes to the copy settings.
10. Press to begin copying.