Using the automatic document feeder (adf) – Kodak 2.2 User Manual
Page 48
Handling Paper
41
www.kodak.com/go/aiosupport
Using the Automatic Document Feeder (ADF)
You can load up to 25 originals (20 to 24 lb / 75 to 90 gsm plain paper) in the
automatic document feeder (ADF).
The ADF accepts originals in the following sizes:
IMPORTANT:
Do not load photographs, cards, or any paper stock heavier than
24 lb / 90 gsm or lighter than 16 lb / 60 gsm in the ADF.
1. Remove any originals from the scanner glass.
2. Move the ADF paper-edge guides outward and pull out the ADF extender.
3. Fan and stack the originals, then insert them face up in the ADF.
IMPORTANT:
Remove all paper clips and staples from the originals.
4. Move the ADF paper-edge guides until they touch the paper.
The ADF automatically feeds the originals into the printer when you begin copying,
scanning, or faxing.
Minimum size
Maximum size
English units
6.9 x 9.8 in.
8.5 x 11.7 in.
Metric units
18 x 25 cm
22 x 30 cm
ADF paper-edge guides
ADF tray
extender