Kodak 2.2 - Manual (Page 50)

Printing
43 www.kodak.com/go/aiosupport
6. Under “Flip on:”, select Long edge or Short edge , then click OK .
7. Click OK to start the print request.
Automatic two-sided printing from a computer with MAC OS
1. Load plain paper into the paper tray.
2. Open the document you want to print, then select File > Print .
3. In the Print dialog box, make sure that Eastman Kodak Company HERO 2.2 AiO is
selected (printers with a wireless connection have a 4-digit number added to
the end of the name).
4. In the Copies & Pages drop-down list, select Layout .
5. In the Two-Sided drop-down list, select either Long-Edge binding or Short-Edge
binding .
6. Click Print .
Manual two-sided printing
You can print two-sided documents on any size paper that the printer accepts (see
Paper sizes, page 36 ) when you rotate the paper manually.
IMPORTANT: Two-sided printing can only be done on media that can absorb ink on both
sides, such as plain paper or two-sided photo paper. Do not print two-sided
on bar-coded photo paper (the bar code is on the back side).
Manual two-sided printing from a computer with WINDOWS OS
1. Load paper into the paper tray.
2. Open the document you want to print, then select File > Print .
3. In the Print dialog box, make sure that KODAK HERO 2.2 AiO is selected
(printers with a wireless connection have a 4-digit number added to the end of
the name), then click
Properties .
4. Select the Layout tab.
5. In the Two-sided printing field, select Manual .
NOTE: You can also select manual two-sided printing from the General tab under
the Job Settings field.
6. Under “Flip on:”, select Long edge or Short edge , then click OK .
7. Click OK to start the print request.
8. When a message appears on your computer and control panel, remove the
printed pages from the output tray, then follow the instructions on the control
panel.
9. Press on the control panel.