Kodak 2.2 - Manual (Page 88)

Faxing
81 www.kodak.com/go/aiosupport
Print Fax
Confirmation Page After Fail Only
(default) / Never /
Always The Fax Confirmation Page contains the
time and date, the number you called,
the number you called from, and
whether the transmission was
successful.
Print Fax Settings -- To print the current fax settings, press
OK. Load letter or A4 paper, then press
.
Print Fax Cover Page -- The Fax Cover Page shows the date and
headings for To and From information for
your fax. Use this cover page, if needed,
when sending your fax.
To print a Fax Cover Page, press OK.
Load letter or A4 paper, then press .
Print Fax Activity Log -- The Fax Activity Log contains
information (date, time, duration,
to/from, number of pages, and more)
about the last 30 faxes sent and/or
received.
To print a Fax Activity Log, press OK.
Load letter or A4 paper, then press .
Dialing Mode Tone (default) / Pulse Determines how the printer dials a fax
number.
Tone dialing (the more common
method) uses tones to dial a phone
number. It is faster and more reliable
than pulse dialing, which uses a series of
pulses to dial a phone number.
Traditionally, pulse dialing was used by
rotary phones; tone dialing is used by
touch-tone phones.
Error Correction On (default) / Off Error correction is applied only when
sending black-and-white faxes. It
reduces the loss of data, which can occur
on poor phone lines.
Error correction increases the send time
on poor phone lines, but the
transmission is more reliable. (Error
correction does not apply to faxes being
received.)
Fax Setting Options Description