Monitoring and adjusting printer performance, Checking ink levels, Resetting factory defaults – Kodak 2.2 User Manual
Page 110: Checking ink levels resetting factory defaults, Resetting factory
Maintaining Your Printer
103
www.kodak.com/go/aiosupport
Monitoring and adjusting printer performance
From the control panel, you can perform tasks to help keep the printer functioning
well.
Checking ink levels
1. Press .
2. Press
to
select
Maintenance, then press OK.
3. With
Check Ink Levels selected, press OK.
The LCD shows approximate levels of ink in the cartridges so you know when it’s
time to order replacement cartridges. Use 30 Series ink cartridges.
NOTE: You can order ink cartridges online. Open Home Center Software and select
Order Supplies
www.kodak.com/go/printingsupplies
.
Resetting factory defaults
1. Press .
2. Press
to
select
Printer Settings, then press OK.
3. Press
to
select
Reset All Settings, then press OK.
4. When you see the message, “This will reset printer settings to factory defaults,”
press
OK.
NOTE: Resetting factory defaults does not change the date and time, language, or
country/region.