Kodak 2.2 - Manual (Page 45)

www.kodak.com/go/aiosupport 38
KODAK HERO 2.2 All-in-One Printer
5. Move the ADF paper-edge guides outward, then insert the paper into the paper
input tray.
6. Move the paper-edge guides until they touch the paper.
Loading photo paper
The capacity of the paper input tray is 20 sheets of photo paper.
Click to view a video that demonstrates loading photo paper.
1. Remove any plain paper from the tray.
2. Move the left paper-edge guide to the far left.
3. Insert the paper (short side first) into the input tray with the logo side facing
toward the tray and the glossy side toward you.
IMPORTANT: Always load the paper short side first. The printer automatically detects the
orientation of the picture, whether it’s portrait or landscape, and prints
accordingly. If the photo paper is loaded in the wrong direction, the image
will be cut off and the paper may jam. If the paper is loaded with the wrong
side up, the image quality will be affected.
4. Move the paper-edge guides until they touch the paper.