Siemens 1015N-2MFM-1A - Manual (Page 5)

1
1015N-2MFM-1A
1015N-2MFM-1 MODEM CARD
INSTALLATION INSTRUCTIONS
1. INTRODUCTION
The 1015N-2M Modem Card is one of three option cards used for remote communications
within the Controlotron 1010N family of flowmeters. External communication is achieved
through an on board dial-up miniature modem with asynchronous line speeds of 2400 bps,
1200 bps, or 300 bps. Implementation of Windows HyperTerminal
TM or any other
communication software allows for the direct control of the modem’s Hayes compatible
command set.
2. 1015N-2M MODEM CARD KITS
2.1 OPTION 1 MOUNTING KIT 1015N-2M-MK1
Description Part Number Qty
Cover, Communication Module 1010-436-1 1
Screw, Captive 6-32 x 1/2 4006M07F09 1
Label, Controlotron ID 1010-257 1
Standoff, Threaded, Cover Mount 1010-433-1 1
Standoff, Threaded, PCB Support 1010-434-1 4
Cover, Analog Input Module 1010-379 1
Installation Drawing 1015N-2M-MK-7 1
Installation, Wiring Drawing 1015N-2M-7 1
Insulator, Syscom shield, 1010N 1010-263 1
2.2 OPTION 2 MOUNTING KIT 1015N-2M-MK2
Description Part Number Qty
Cover, I/O Board 1010-446-1 1
Screw, Captive 6-32 x 1/2 4006M07F09 1
Label, Controlotron ID 1010-257 1
Standoff, Cover Mount 1010-447-1 1
Standoff, Threaded, PCB Support 1010-434-1 4
Installation Drawing 1015N-2M-MK-7 1
Installation, Wiring Drawing 1015N-2M-7 1
2.3 OPTION 3 MOUNTING KIT 1015N-2M-MK3
Description Part Number Qty
Cover, I/O Board 1010-446-2 1
Screw, Captive 6-32 x 1/2 4006M07F09 1
Label, Controlotron ID 1010-257 1
Standoff, Cover Mount 1010-447-1 1
Standoff, Threaded, PCB Support 1010-434-1 4
Installation Drawing 1015N-2M-MK-7 1
Installation Drawing 1015N 1
Installation, Wiring Drawing 1015N-2M-7 1