Chapter 1: overview, Physical outlook, Front panel – Siemens ADSL 50 User Manual
Page 8
SANTIS ADSL 50/500 User Manual
Chapter 1: Overview
Physical Outlook
F
F
r
r
o
o
n
n
t
t
P
P
a
a
n
n
e
e
l
l
The following illustration shows the front panel of the ADSL Router:
LED Indicators (Front Panel System Messages)
The ADSL Router is equipped with LEDs on the front panel as described in the table below (from left to right):
LED
Color Status
Description
OFF Power
off.
PWR Green
ON Power
on.
OFF
Power off or initial self-test of the unit is OK.
Blinking When software downloading or updating operation parameters located in FLASH memory is in
progress.
DIAG Green
ON
Initial self-test failure or programming FLASH memory failure.
OFF
Power off or no Ethernet carrier is present.
Blinking Ethernet carrier is present and user data is going through Ethernet port.
LAN1
to
LAN4
Green
ON
Ethernet carrier is present.
OFF
Power off or no radio signal (WLAN card is not present or fails to function).
Blinking Traffic is going through Wireless LAN interface.
WLAN Green
ON
Wireless LAN interface ready to work.
OFF
Power off or ADSL line connection is handshaking or training is in progress.
Blinking User data is going through ADSL port.
DSL Green
ON
ADSL line connection is OK.
8