Siemens ADSL 50 - Manual (Page 45)

Chapter 3: Configuration
WLAN Configuration
This section shows you how to configure the wireless LAN setting. To types are provided here, Basic Setup and
Association Control.
Basic Setup
Note:
If you are entering the WEP key manually, make sure that you use only the following digits
and letters: 0 – 9, a or A, b or B, c or C, d or D, e or E and f or F
Wireless SSID
(Service Set Identity): A name that uniquely identifies a wireless domain. All wireless clients that want to
communicate with the ADSL Router must have the same SSID as it.
Note:
Click Hide SSID to not broadcast the SSID on the wireless network, which prevents your
wireless LAN Access Point from hacker attacks. If the SSID is hidden, an unauthorized
wireless LAN client is not able to connect to your wireless LAN Access Point.
45