Siemens ADSL 50 - Manual (Page 51)

Chapter 3: Configuration
The page will show DNS server 1-3 IP address fields specify up to three DNS IP addresses click Apply.
If you have been setting before, the page will show all the DNS Relay status. To disable DNS relay, just select the
Disabled option then click Configure. To modify setting select enable and click Configure again.
DNS Server
The DNS server address will be passed to the DHCP clients along with the IP address and the DHCP clients use the
DNS to map a domain name to its corresponding IP address and vice versa.
DNS Server: Select Enabled or Disabled to enable/disable the DNS server and then click Configure.
The DNS hostname table shows all the current DNS clients, whether created by DHCP client
or manually created. If it created by manual client, you can delete the hostname entry on the
table.
If you want to change the domain name, please select Enabled and click Configure. Then
fill in Domain Name and click Apply.
Create New DNS
Hostname Entry:
To add new hostname entry, please click Create a new DNS hostname entry manually
button. Then fill in the Hostname and IP address and click Apply.
51