Siemens ADSL 50 - Manual (Page 66)

SANTIS ADSL 50/500 User Manual
Multiple PVCs Mode
RADIUS
Server
Public IP(s)
Pre-assigned by ISPs
PC(s)
Service
Aggregator
STM-1
DSLAM
ADSL
Router
Loop
ISP b
Hub
ISP a
(PPPoE)
PVC2
PVC1
(IPoA)
PVC2b
PVC1a
128.12.0.0
140.196.0.0
Description:
As this ADSL Router supports multiple PVCs in the ADSL loop, you are allowed to configure several logical
channels in one physical loop. You can use mixed encapsulation types by applying them to different PVCs. When the
system starts up, it will connect to CO site through the PVCs according to the sequence they are created. Therefore
the default route will be the last PVC you created. You can also modify the default route manually from the IP Route
page.
The traffic from CPE side will be sent to different PVCs according to the routing rules.
Configuration:
1.
Start up your browser and type 192.168.1.1 as the address to enter this ADSL web-based manager.
2. Create the first PVC (e.g. PVC1) using the RFC1483 data mode.
Refer to the section of “Router Mode” for details.
3. Create the second PVC (e.g.PVC2) using the PPPoE data mode. Refer to the section of “PPPoE + NAT
Mode” for details.
4. Save the configuration by execute System >Save and System >Restart to restart your router for initiating these
settings.
66