Samsung FINNESSE SCH-R810 - Manual (Page 150)

Changing Your Settings 148
– Use the up and down arrow buttons to select the current time.
– Press the OK soft key to save your time setting.
Touch Sensitivity
Touch Sensitivity lets you adjust how much pressure you must
apply to the screen for the Finesse™ to react.
1. From the Settings menu, select Phone Settings ➔ Touch
Sensitivity. The Touch Sensitivity screen appears in the
display.
2. Press, hold, and slide the Touch Sensitivity button left or
right to adjust the screen’s responsiveness to your touch (1
– 5).
3. Test your setting by applying pressure to the Touch Here
button until it responds.
4. If desired, repeat steps 2 and 3 until the Touch Sensitivity
setting is acceptable.
5. To save your new setting, press the Save soft key.
Calibration
Calibration lets you adjust the screen ability to correctly locate
your touch.
1. From the Settings menu, select Phone Settings ➔
Calibration. The Calibration screen appears in the display.
2. To begin calibration of the screen, press the OK soft key. A
series of five crosses appear in the screen.
3. To calibrate the screen, press the center of each cross in
turn.
Important!: For this calibration process to succeed, it is recommended that
you use a stylus to accurately set the new touch points.
PC Connection
PC Connection lets you select how your Finesse™ responds to
being connected to personal computer using an optional USB
Data Cable.
1. From the Settings menu, select Phone Settings ➔ PC
Connection. The following PC Connection options appear in
the display:
• USB Mass Storage — Allows you to manage files on an optional
microSD Memory Card in your Finesse™, just as you would files on
a flash drive. (For more information, refer to “Memory Card
(Optional)” on page 8.)
• No Connection — Blocks communication between your
Finesse™ and another USB device, such as a PC.