SMC Networks SMCWHSG44-G - Manual (Page 83)

2.8.2.4. SNMP
Fig. 107. SNMP Settings.
The SMCWHSG44-G can be managed by SNMP (Simple Network
Management Protocol). You can specify the name (used as a password) of
the read-only and read-write community. In addition, up to 5 SNMP trap
targets can be set in the SNMP Trap table.
To specify a trap target:
1. Type the IP address of the target host.
2. Type the Community for the host.
3. Select the corresponding check box next to the IP address text box.
2.8.3. Access Rules
Fig. 109. Access Rules Settings.
The SMCWHSG44-G provides the 'Access Rules' to permit/deny the wireless
users access in specified date/time frame.
To specify the SMCWHSG44-G access rule with the date/time frame:
1. Select the Column of the Date / Time Access Rule Table (default all
columns are 'Permitted'), the specified column will be 'Denied' and
turn to white.
2. Continue step 1 until all preferred Date/Time column specified to
be 'Denied'.
82