SMC Networks SMCWHSG44-G - Manual (Page 45)

authenticated by SMCWHSG44-G. Authenticated users can also be
terminated in this table.
• Account Table. Manually generates new users, or is automatically populated
with accounts after entering amount of time required via the keypad.
• Session list. Display the status of session traffic
• Managed LAN Devices. Display the status of local LAN devices
connected to the Wireless Hotspot Gateway.
2.1.2. Save, Save & Restart, and Cancel Commands
Fig. 35. Save, Save & Restart, and Cancel.
At the bottom of each page, there are up to three buttons-Save, Save &
Restart, and Cancel. Clicking Save stores the settings changes to the
memory of the Router and brings you back to the start page. Once all the
changes are complete you will need to click the Restart button on the home
page to reboot the router. Clicking Save & Restart stores the setting
changes to the memory of the Router and restarts the Router immediately
for the setting changes to take effect. Clicking Cancel discards any settings
changes and brings you back to the start page.
2.1.3. Home and Refresh Commands
Fig. 36. Home and Refresh.
At the bottom of each status page that shows read-only information, there
are two buttons-Home and Refresh. Clicking Home brings you back to the
start page. Clicking Refresh updates the shown status information.
2.2. Status
2.2.1. Associated Wireless Clients
Fig. 37. Status of Associated Wireless Clients.
On this page, the status information of each associated client, including its
MAC address, IP address, user name (if the client has been IEEE 802.1x
authenticated), number of bytes it has sent, number of bytes it has received,
and the time of its last activity, is shown.
44