Sennheiser WiCOS - Manual (Page 63)

61
Configuring the conference system
Setting the operating mode of the access point
The access point is suitable for stand-alone operation or can be integrated
into a wired SDC 8200 conference and interpretation system (slave mode
operation).
̈
In the main navigation, click “ Conference management ”.
The “ General Conference Settings ” overview screen appears.
̈
In the “ Select the Operating Mode ” box, select the “ Stand Alone ”,
“ SDC 8200 ” or the “ TCS 5500 ” option button.
̈
Click “ Save settings ”.
The setting is saved. The access point is set to the desired operating
mode.
The status indicator ^ provides information on the operating mode:
Setting Operating mode of the access point
“ Stand Alone “ Stand-alone operation
“ SDC 8200 “ Integrated operation (slave mode operation)
The WiCOS conference system is integrated into a
wired conference and interpretation system and
operates in slave mode (see page 73 and the
instruction manual of the SDC 8200 or TCS 5500
system). “ TCS 5500 “
^
Blue LED 1 ... Operating mode of the access point
flashes slowly Integrated operation (slave mode)
lights up Stand-alone operation