Sennheiser WiCOS - Manual (Page 49)

47
Configuring the conference system
Apple MacOS X operating system If you are using Apple MacOS X , proceed as follows in order to set a static
IP address (see also the instruction manual of the operating system):
̈
Click the “Apple” icon and select “System Preferences”.
The “System Preferences” window opens.
̈
Click “Network”.
The “Network” window opens.
̈ From the “Show” drop-down list, select “Built-in Ethernet”.
̈
Click “Configure...”.
The “Built-in Ethernet” window opens.
̈
From the “Configure IPv4” drop-down list, select “Manually”.
̈
In the “IP address” field, type your desired IP address, e.g.
192.168.0.12.
̈
In the “Subnet mask” field, type the subnet mask 255.255.255.0.
Both addresses have to be within the address range of the access point.
̈
Confirm your entries by clicking “Apply now”.
Do not use the IP address of the access point: 192.168.0.10.