Sanyo MM-9000 - Manual (Page 215)

Section 2K: Using Your Phone’s Built-in Camera 205
Setting the Flash
To activate the flash:
1. From camera mode, press Options (right softkey).
2. Highlight Flash and press .
3. Select your desired option and press .
Note: While the phone is open and in camera mode, press to switch
between flash modes.
Setting the Self-Timer
To activate the self-timer:
1. From camera mode, press Options (right softkey).
2. Highlight Self-Timer and press .
3. Highlight the length of delay you want the timer to use
(10 Seconds or 5 Seconds) and press
.
Ⅲ To deactivate the self-timer, highlight Off and
press
.
4. Press Start (left softkey) when you are ready to start the
timer. (The
icon appears on the upper right portion of
the main LCD during the self-timer countdown.)
5. Get ready for the picture. (When the timer is down to
three seconds, the self-timer icon will turn red and the
phone will begin to beep.)
To cancel the self-timer after it has started:
ᮣ Press Cancel (right softkey).
Note: While the self-timer is active, all keys are disabled except ,
, and Cancel (right softkey).
C
amer
a