Sanyo MM-9000 User Manual
Page 193
Section 2J: Using the miniSD Card
183
Important Note:
Be sure to use only recommended miniSD cards
(16MB-1GB). Using non-recommended miniSD cards could cause data loss
and damage your phone.
We recommend using miniSD cards listed below.
SANDISK: 16MB-1GB , PANASONIC: 16MB-256MB , TOSHIBA: 16MB-256MB ,
LEXAR: 32MB-128MB. (They have all been tested and verified to work properly
as of June, 2005.)
Note:
This phone does not support the miniSD card security function.
Removing the miniSD Card
1.
To remove the card, make sure the power is off. Open the
miniSD card slot by lifting the cover upward. Push the
top of the card into the slot to unlock it.
2.
Gently pull the card from its slot.
3.
Close the slot cover.
Note:
The miniSD card and its adapter can be easily damaged by improper
operation. Please be careful when inserting, removing, or handling them.
Note:
The miniSD card slot cover may come off if forcibly pulled. If this
occurs, simply place the cover back into its original position.
miniSD
C
a
rd