Sanyo MM-9000 User Manual

Page 205

Section 2J: Using the miniSD Card

195

Ⅲ

Number of Copies: You can set the number of copies
(1-10). (You cannot specify number of copies when
Index Print is selected.)

Ⅲ

Print Size: You can set the print size from Default
Printer, 4”x6”, 5”x7”, 8”x10”, or Letter. (Print Size
differs depending on the type of printer you have.)

Ⅲ

Date Stamp: You can imprint the date on your
pictures. Select On or Off. (Correct Date Stamp may
not be placed depending on the type of printer you
have.)

When you are finished selecting the printer settings,
press Print (right softkey).

10.

When finished printing, press

11.

Select Yes. Follow the instructions on the display to
unplug the USB cable from the phone.

Note:

The Index Print mode lets you print out an index sheet of thumbnail

pictures. You will only be able to print Exif JPEG files. Non-supported file
formats on the miniSD card will be displayed as

Note:

While you are connected to the printer, your phone’s screen will

display “Phone Off.”You cannot make or receive calls.

Note:

Make sure your battery is fully charged before using the PictBridge.

PictBridge Error Messages:

From time to time you may encounter

printing problems. Any printer error messages will be displayed on your
phone, informing you of the specific problems encountered. Please refer to
the user’s guide that came with your printer for descriptions, explanations,
and possible resolutions for any error messages.

miniSD