Samsung Digimax V50 - Manual (Page 94)

94
Before contacting a service center
Please check the following
Symptom Causes Remedy
- Insert fresh batteries
- Connect an AC Power Adapter
- Insert the batteries according to the
polarity marks (+, -)
- There is low battery
capacity
- An AC Power Adapter is
not connected
- Batteries are inserted
incorrectly with the
reverse polarities
- The batteries are exhausted
- The Camera is turned off
automatically
- The Adapter plug is not
connected securely
- The Camera is being
used in low temperatures
- The memory card is not
inserted
- There is insufficient
memory capacity
- The memory card has
not been formatted
- The memory card is
exhausted
- The camera’s power is off
- The batteries are exhausted
- The memory card is
locked
- Batteries are inserted
incorrectly with the
reverse polarities
The camera
doesn t switch on
The camera
power ceases
whilst in use
Batteries drain
quickly
Camera does
not take images
when pressing
the Shutter
button
- Insert fresh batteries
- Press the power button to reactivate
camera
- Remove and re-insert the plug
- Keep the camera in warm conditions
(i.e. inside a coat or jacket) and only
remove it in order to take images
- After turning the camera off, insert a
new memory card
- Delete unnecessary image files
- Format the memory card (p.82)
- Insert a new memory card
- Turn the camera power on
- Insert fresh batteries
- Refer to [CARD LOCKED!] error
message (p.93)
- Insert the batteries according to the
polarity marks (+, -)
- The camera was stopped
due to a malfunction
The camera
suddenly stops
working while in
use
- Remove /re-insert batteries and switch
the camera on