Samsung Digimax V50 - Manual (Page 40)

40
S button
Main menu Sub menu Available camera mode
A (Aperture priority mode)
S (Shutter priority mode)
M (Manual mode)
Shutter speed, Aperture value
(Changed by zoom scale)
A/S/M mode
LT
RGB R(Red), G(Green), B(Blue)
Compensating Exposure
1. Press the S button, and then use the UP and DOWN
buttons to select the exposure compensation icon ( ).
The exposure compensation menu bar will appear as
shown.
2. Use the LEFT and RIGHT buttons to set the desired
exposure compensation factor.
3. Press the OK button.
The value you set will be saved and the Exposure
Compensation setup mode will close.
If you change the exposure value, the exposure indicator ( ) will be displayed on the
bottom of the LCD monitor.
* A negative exposure compensation value reduces the exposure.
Note that a positive exposure compensation value increases the exposure and the LCD
monitor will appear white or you may not get good pictures.
Exposure compensation : This camera automatically adjusts the exposure according to the
ambient lighting conditions. You can also select the exposure value
by using the S button.