Samsung Digimax V50 - Manual (Page 42)

42
S button
Selecting an ISO Sensitivity
1. Press the S button, and then use the UP and DOWN
buttons to select the ISO icon ( ).
The ISO menu bar will appear as shown.
2. Use the LEFT and RIGHT buttons to select the desired
ISO sensitivity value.
- AUTO : The camera's sensitivity is
automatically changed by
variables such as lighting value or
subject brightness.
- 50, 100, 200, 400 : You can increase the shutter speed while the same amount of light is
present, by increasing the ISO sensitivity.
However, the image may be saturated in high luminance.
The higher the ISO value, the higher the camera’s sensitivity to light is and therefore the
greater its capacity to take pictures in dark conditions. However, the noise level in the
image will increase as the ISO value increases, making the image appear coarse.
3. When you press the OK button, the value you set will be saved and ISO setup mode will end.
ISO : You can select the ISO sensitivity when taking pictures.
The speed or specific light-sensitivity of a camera is rated by ISO numbers.
RGB : Allows the user to adjust the R (Red), G (Green), and B (Blue) values of the images to
be captured.
Setting RGB Values
1. Press the S button, and then use the UP and DOWN
buttons to select the RGB icon ( RGB ). The RGB menu
bar will appear as shown.
2. Use the UP/ DOWN/ LEFT and RIGHT buttons to select
the desired RGB value.
- Up/ Down Button : Navigates between R, G, and B
icons.
- Left/ Right Button : Changes value of each icon.
3. When you press the OK button, the value you set will be saved and RGB setup mode will
end.