Samsung Digimax V50 - Manual (Page 25)

25
Starting the recording mode
How to use the MySET mode ( )
This mode allows users to save frequently used shooting settings for later use.
Steps from 1-4 are the same as those for AUTO mode.
5. Select the MySET mode by rotating the mode dial.
6. Press the menu button.
7. Use the Left/Right buttons to select the [LOAD] menu
tap. Use the Up/Down buttons to select desired MYSET
number.
8. Press the OK button to load the camera configuration
saved in the MYSET number and close the menu
screen.
9. Point the camera towards the subject and compose the
image by using either the viewfinder or LCD monitor.
10. Press the shutter button to capture an image.
Please see page 53 for details of the MYSET shooting
mode and menus.
[ MySET mode ]
How to use the VOICE RECORDING mode ( )
Steps from 1-4 are the same as those for AUTO mode.
5. Select the VOICE RECORDING mode by rotating the
mode dial.
6. Press the shutter button to record a voice.
- Press the shutter button once and voice is recorded for
as long as the available recording time (Max : 1 hour)
allows.
The recording time will be displayed on the LCD
monitor.
Voice will still be recorded if the shutter button is
released.
- If you wish to stop recording, press the shutter button
again.
- File type : *.wav
A distance of 40cm between you and the camera (microphone) is the best distance to record
sound.
[ VOICE RECORDING mode ]