Samsung Digimax V50 - Manual (Page 67)

67
If all memory card slots are full, use this function to copy images in one memory card to
another.
Copy Pictures
1. Press the play mode button and press the menu button.
2. Press the LEFT/ RIGHT button and select the [COPY]
menu tab.
3. Select a desired sub menu by pressing the UP/ DOWN
button and press the RIGHT button.
[SELECT] : Menu to select source memory card is
displayed.
1) Use the Up/Down buttons to select a desired memory
card and press the OK button.
2) Selection window for an image to copy is displayed.
- Up/Down/Left/Right : Select an image.
- S Button
: Confirm the selection. mark is
displayed if an image is selected.
3) Press the OK button to copy the confirmed image to the
other memory card.
[ALL] : Menu to select source memory card is displayed.
1) Use the Up/Down buttons to select a desired memory
card and press the OK button.
2) The copy confirmation window is displayed.
Press the OK button again to copy all images to the
other memory card.
Copy Pictures
All memory slots need to be loaded for the function.
If the destination is smaller than the source, the remaining files are not copied.
Please delete unneeded files to free up enough memory space before copying.
While copying a picture, the destination file is automatically renamed to the next
sequential filename after the last saved file to avoid filename duplication.
INFORMATION
COPY
SELECT
ALL SD/MMC MS
SD/MMC MS
EXIT:OK MOVE:
COPY?
COPY : OK
CANCEL :
SELECT:S SET:OK