SMC Networks TigerSwitch - Manual (Page 457)

VLAN C
OMMANDS
4-215
Default Setting
None
Command Mode
Interface Configuration (Ethernet, Port Channel)
Command Usage
Promiscuous ports assigned to a primary VLAN can communicate with
any other promiscuous ports in the same VLAN, and with the group
members within any associated secondary VLANs.
Example
show vlan private-vlan
Use this command to show the private VLAN configuration settings on
this switch.
Syntax
show vlan private-vlan [community | isolated | primary]
• community – Displays all community VLANs, along with their
associated primary VLAN and assigned host interfaces.
• isolated – Displays all isolated VLANs, along with their associate
primary VLAN and assigned host interfaces.
• primary – Displays all primary VLANs, along with any assigned
promiscuous interfaces.
Default Setting
None
Command Mode
Privileged Executive
Console(config)#interface ethernet 1/2
Console(config-if)#switchport private-vlan mapping 2
Console(config-if)#