SMC Networks TigerSwitch - Manual (Page 350)

C
OMMAND
L
INE
I
NTERFACE
4-108
• You can also manually add secure addresses with the
mac-address-table static command.
• A secure port has the following restrictions:
- Cannot use port monitoring.
- Cannot be a multi-VLAN port.
- Cannot be connected to a network interconnection device.
- Cannot be a trunk port.
• If a port is disabled due to a security violation, it must be manually
re-enabled using the no shutdown command.
Example
The following example enables port security for port 5, and sets the
response to a security violation to issue a trap message:
Related Commands
shutdown (4-151)
mac-address-table static (4-179)
show mac-address-table (4-181)
802.1X Port Authentication
The switch supports IEEE 802.1X (dot1x) port-based access control that
prevents unauthorized access to the network by requiring users to first
submit credentials for authentication. Client authentication is controlled
centrally by a RADIUS server using EAP (Extensible Authentication
Protocol).
Console(config)#interface ethernet 1/5
Console(config-if)#port security action trap
Table 4-32 802.1X Port Authentication
Command Function Mode Page
dot1x
system-auth-control Enables dot1x globally on the switch. GC 4-109
dot1x default Resets all dot1x parameters to their
default values GC 4-110